Shop
Showing 1–24 of 276 resultsSorted by latest
-
MAX Bank Series™
MBS300-XX | MaxBank Lobby Panel System 18.5 inch Screen Single Point Visual Status of 10-24 Cars
MAX Bank Series™MBS300-XX | MaxBank Lobby Panel System 18.5 inch Screen Single Point Visual Status of 10-24 Cars
The MBS300 is designed for projects of 10-24 Cars and up to 16 Groups. An 18.5″ Industrial TFT screen provides a sleek and modern single visual point of the operating status for all Cars, with standard screen jewels for Fire Phase 1 & 2, Emergency Power, and Car Arrived with Doors Open. Remote Fire Recall and Emergency Power switches are included as a standard.
SKU: MBS300-XX -
Acoustics
CQHTJ | 2 Ton Hydraulic Toe Jack
In order to minimize structure-borne hydraulic elevator sound migration, attention must be given to the isolation of each system component, most significantly the power unit. The CQuiet 2 Ton Hydraulic Toe Jack supports hydraulic power unit isolation applications and installation.
SKU: CQHTJ -
-
Acoustics
CQHPUI-356 | Hydraulic Power Unit Isolation Pads for 2,300 – 4,000 lb. Power Units
The CHPUI isolation pad series incorporate a steel plate for uniform load distribution over the entire pad surface area. The steel plate thru-hole is oversized preventing metal-to-metal contact with the anchor bolt.
SKU: CQHPUI-356 -
Acoustics
CQHPUI-27535 | Hydraulic Power Unit Isolation Pads for 1,000 – 2,200 lb. Power Units
The CHPUI isolation pad series incorporate a steel plate for uniform load distribution over the entire pad surface area. The steel plate thru-hole is oversized preventing metal-to-metal contact with the anchor bolt.
SKU: CQHPUI-27535 -
Acoustics
CQuiet | Pipe Barrier Noise Shield
CQuiet Barrier Noise Shield is a highly effective sound barrier solution for multiple sound control applications in hydraulic elevator installations.
CQuiet Pipe Noise Shield provides containment of equipment and fluid sounds radiating from the pipe itself. Steel is a very conductive material for sound travel, adding to sound levels within the machine room and hoistway.SKU: CQPNS -
Acoustics
CQuiet | Door Barrier Noise Shield
CQuiet Barrier Noise Shield is a highly effective sound barrier solution for multiple sound control applications in hydraulic elevator installations.
CQuiet Door Noise Shield increases the sound barrier properties of any door, metal or wood. The door is always your weakest acoustical point of the machine room. For a complete door system treatment include a CQuiet Door Noise Kits to tightly seal the door.SKU: CQDNS -
Acoustics
CQuiet | Hydro Barrier Noise Shield
CQuiet Barrier Noise Shield is a Class A fire-rated sound barrier designed to reduce noise and vibration in hydraulic elevator installations. Its reinforced composite construction combines a durable aluminum-faced sound barrier with sound-absorbing fiberglass backing for effective noise reduction and isolation.
CQuiet Hydro Noise Shield is a barrier against the structure-borne sound migration of the high acoustic energy radiating from the power unit into the wall. The nominal 1 inch thickness is ideal for limited space applications.SKU: CQDNS4848 -
Acoustics
CQuiet | Hydraulic Pipe Stand Isolation
Minimizing structure-borne hydraulic elevator sound migration requires detailed attention to isolation of each system component, from the power unit to the rail guides.
A quality muffler installed will greatly reduce the sound carried through the fluid; however, the equipment generated sound energy will travel through the steel of the pipe. The hard, rigid steel-on-steel mechanical connections provide an ideal migration path the entire pipe length to the cylinder.
CQuiet Hydraulic Pipe Stand Isolation provides effective isolation of the pipe stand assembly. Isolation of the pipe is a full pipe wrap strip, support base pad, and isolated washer to prevent a short circuit through the anchor.SKU: CQHPSI-K -
Acoustics
CQuiet | 360 Pipe Isolation
Hydraulic pipe allow a very conductive migration path for equipment generated sound and vibration through the pipe and fluid. Standard industry support systems have little or no mechanical isolation against structure-borne sound migration.
The CQuiet 360 Pipe Isolation is designed to fit standard 1-5/8inch wide channel supports for stand, wall, or ceiling installation. The elastomeric isolation provides high shock and vibration damping, reducing unwanted noise migration into occupied spaces.
A fail-safe 360° isolation design using interlock edges and channel locator legs to ensure that the isolation is installed properly and remains in place.
New and existing installation with an easy change out of existing pipe clamps that also prevents galvanic corrosion. Available in four standard sizes for 2inch, 2 1/2inch, 3inch, or 4inch pipes.
For a complete hydraulic pipe sound treatment include the CQuiet FireStop Noise Putty and CQuiet Pipe Noise Wrap in your project specifications.
CQuiet Firestop Noise Putty Stick is reusable when adding or changing penetrating items since the material remains pliable and does not set up.SKU: CQ360PI -
Acoustics
CQuiet | Firestop Noise Putty
Hydraulic pipe wall penetrations are a frequent point of noise migration. Often the penetration opening is unfilled or improperly filled with a non-fire rated material. Physical contact of the pipe and wall allows structural migration of the systems noise.
Common filler materials provide no significant noise barrier properties or fire protection. CQuiet Firestop Noise Putty provides isolation and high noise blocking properties for wall penetrations around hydraulic pipes.SKU: CQFNP -
Two Way Communication, Fire Safety
NINPS-T12X | EVAC Security Station – Desktop / Wall Mount
This system is designed to meet the requirements for the 24 / 7 in house 2-way communication code 2.27.1.
System provides a 12.1″ Touch Screen with Peer-to-peer Server software/interface. Network intercoms / in Ceiling Camera’s, Machine Room interfaces, per code it provides a UPS for the Touch Screen, Battery Backup for the Intercom / Camera / OELD Unit, system supports a universal 3 button interface 12-120v / Dry Contact
SKU: NINPS-T12X -
Two Way Communication, Fire Safety
NINPM-TXX | EVAC Machine Room Master
Unit was designed to be used as a Master Station to communicate between cars in its group/bank and security Master Station over the existing network. It also utilizes C.E.’s Speaker Switch that allows the intercom to share a speaker with 2 other 8ohm inputs and the in-car phone with priority.
1-3 Cars put 0 for first digit and 1 through 3. This will give you the smaller Master Station.
4-8 Cars put 0 for the first digit and 4 through 8. This will give you the larger Master Station.
SKU: NINPM-TXX -
-
Two Way Communication, Fire Safety
NINPC-TX | EVAC Elevator Audio Camera and Display 2 Way Communication
Two Way Communication, Fire SafetyNINPC-TX | EVAC Elevator Audio Camera and Display 2 Way Communication
The product provides an in-car interface which communicates with both the Machine Room Station and the Security Command Station over the existing network. Includes a ceiling mount camera and a 2.7 OLED display for text data. Optional upgrade to an Elitie PI product for text data.
SKU: NINPC-TX -
ADA Accessibility, Annunciators, MICRO COMM Displays
VM3541-XXXXX | Digitized Floor Annunciator Allows 8 messages Total time 8 minutes
ADA Accessibility, Annunciators, MICRO COMM DisplaysVM3541-XXXXX | Digitized Floor Annunciator Allows 8 messages Total time 8 minutes
The basic system includes up to eighty different messages, with a total message time of 8 minutes. The system can be used as a stand-alone or in conjunction with independent position indicators. 16 discrete inputs can be combined to announce messages or floors.
SKU: VM3541-XXXXX -
Otis, Otis Elite LCD Displays
OX104-CX2 10.4 Inch Standard Luxury PI Liquid Crystal Display (LCD)
The Luxury PI is the most flexible position indicator available. With the Luxury layout software, you can customize your own position indicator by selecting background colors and textures, fonts, and arrow styles.
SKU: OX104-CX2 -
Otis, Otis Voice
VO3541-X | Otis Serial Voice for Otis Serial Link (RSL Link)
The basic system includes up to eighty different messages, with a total message time of 8 minutes. The device works with the Otis serial (RSL link) link and gets its data from the link. Position, direction, and priority messages as well as door strobe are available.
SKU: VO3541-X -
Otis, Otis Lanterns
SNAPIN-OSG | 3 Inch LED Arrow for Hall and car lanterns arrival or traveling
Long life, solid state bi-color arrow for lanterns, 100,000 hour rated life and is housed in convenient snap-in enclosure. Accepts signals from Otis serial CDL link. The bi-color arrow is green for up and red for down.
SKU: SNAPIN-OSG -
Otis, Otis Lanterns
SNAPIN-OFG | 3 Inch LED Arrow for Hall and car lanterns arrival or traveling
Long life, solid state bi-color arrow for lanterns, 100,000 hour rated life and is housed in convenient snap-in enclosure. Accepts signals from -24/30 volts DC. The bi-color arrow is green for up and red for down.
SKU: SNAPIN-OFG -
Otis, Otis Lanterns
SNAPIN-OCG | 3 Inch LED ARROW for Hall and car lanterns arrival or traveling
Long life, solid state bi-color arrow for lanterns, 100,000 hour rated life and is housed in convenient snap-in enclosure. Accepts signals from 100 to 120 volts ac. The bi-color arrow is green for up and red for down.
SKU: SNAPIN-OCG -
Elevator Accessories
SKOFF | Intelligent Lighting Shut off with selectable pre-determined time
A solid-state light override circuit unit that looks at door close signals and after a selectable pre-determined time, operates a relay that turns the lamp/fan circuit off. Door signals that change the state of the control, restores the lamp circuit.
The device also has a phone interrupt circuit that overrides the device for 24 hours.SKU: SKOFF -
-
Elevator Accessories
SKCAB-XXXXXX | Elevator Cab Lighting LED battery-backed cab lighting system
The SKCAB battery-backed cab lighting system was designed to provide an efficient LED-based lighting solution for elevator cabs. In the event of a power outage, it also incorporates an emergency battery backup system to provide power for lights and a cab-operated alarm.
SKU: SKCAB-XXXXXX
