DOWNLOADS
Software
5.1 KBEach DeviceNet device comes with a Electronic Data Sheet file (EDS). This EDS is the description for the COSS/Qualifier Interface module.
5.1 KBEach DeviceNet device comes with a Electronic Data Sheet file (EDS). This EDS is the description for the DeviceNet Qualifier Interface module.
5.4 MBThis application is for calibrating 2nd generation qualifiers.
4.4 MBSoftware utility for use with AQ100 qualifiers. This utility simplifies the set-up process and also has graphing functions.
12 KBUseful utility for putting together serial strings and sending/receiving serial strings over a COMM port. This version has some nice string saving features.
12 KBOld Terminal Application. Terminal II is much handier and works much better.
13 KBTerminal program used for sending and receiving data via a comm port. This particular version polls the serial port on a regular basis instead of waiting for events to be raised by the operating system.
362.4 KBDevice Programmer Windows application for programming TCVs, TCV w/Etherent, Torque Cart etc... Version 1.3.3
806.8 KBUsed to communicate with the RPYT POPP Clamp Receiver, set clamp detection sensitivity, configure the relays, etc.
227.1 KBOld style pneumatic Assembly Qualifier manual.
1.3 MBSome of CE Electronics DeviceNet equipped products use the Anybus IC. This zip file contains a manual from the Anybus folks explaining how to get their devices on-line. This Zip file also contains the EDS files necessary for the network to recognize the devices.
497.5 KBOfficial Release of ToolManager software. This utility can be used to communicate with a AQ Wireless/Global 8. Parameter sets can read, edited and the re-written. There is also a nifty logging function that can act as a poor man's production system.
8.9 MBCalibration software for PET (Pressure Evaluation Tool)
Manuals
261.9 KBThis document is a 17 page operations guide for the COSS/Qualifier Interface.
75.3 KBThis document is a simple manual that details the configuration, inputs, outputs, and wiring interfact for the Device Net Qualifier.
938.7 KBA 204 page multilingual flowchart of the FAS3000 user interface. (Part No. 2050479303 Issue 1 10.02)
4.4 MBA 40 page multilingual operator instruction for the FAS3000. (Part No. 2050479093 Issue 1 10.02)
59.7 KBSchematic and pin out for the inputs and outputs on the GFR 19 pin connector.
1.7 MBOperations guide for the GFR Assembly Qualifier?. PN-11500017 Revision D010604
180.8 KBA manual and quick start guide Pressure Evaluation Tool (PET). PN-11500010 Revision D032400
140.2 KBPFCS test certification check list
514.7 KBThis document is an operations guide and quick start quide (if connecting via UDS-10) for the PFCS/Qualifier Interface.
199.9 KBThis document is an operations guide for the Atlas Copco RE Qualifier II. A quick start guide and I/O details are included. Rev D101701
516.7 KBThis document is an operations guide for the SK75. PN-11500032 Rev-D082404
57.1 KBSpecifications for teh TB-75. PN-11500033 Rev-D082604
1.3 MBPneumatic Tool Monitor TVP-100 Series user's guide. Ver-1.0
523.9 KBProgramming/Operations manual for SK-100 unit. The SK-100 is a power supply and fastening monitor for brush and brush-less electric tools.
494.1 KBQuick-start guide for the POPP Clamp tool.
928.6 KBThis addendum describes the functionality of the PFCS (Chrysler) network interface that can be installed in an AQ Wireless/Global 8.
194.7 KBThis addendum includes instructions on how to use the Ethernet IP network interface that can be installed in AQ Wireless/Global 8 units.
270.2 KBThis addendum illustrates the functionality of the Atlas Open Protocol network interface that can be installed in an AQ Wireless/Global 8 unit.
494.1 KBQuick-start guide for the POPP Clamp tool.
Mechanical Drawings
30.3 KBThis drawing shows the packaging of the Device Net Qualifier Interface.
115.8 KBExploded CAD view and itemized bill of materials for the FAS3000
47.5 KBPFCS interface assembly packaging and mounting dimensions.
151.0 KBAQ-PLC box assembly package and mounting dimension CAD drawing. DWG NO. Q4614002
145.8 KBCAD drawing of the SK75 package and mounting dimensions. DWG No. Q4699005
143.7 KBCAD drawing of the SK-BAPS package and mounting dimensions. DWG No. Q4902001
123.9 KBCAD drawing of the TB-75 package and mounting dimensions.
136.9 KBCAD drawing of the TCV package and mounting dimensions. DWG No. Q4755001
247.6 KBTSII box assembly package and mounting dimension CAD drawing. DWG NO. Q4106001
28.1 KBDrawing of POPP Clamp End Effector-Replacement Parts