DLMS301 SP Series Gate Lock Parallel DCL 2DOB
Install the software attached and then follow the directions on the rest of that pullsheet and that is all that is required for a DMC with passthrough.
- This “.bfo” file is not meant to be opened or viewed, it is a software file specifically for the DLM units.
- To install, get a usb thumb drive and format it. Make sure the file system of the stick is FAT or FAT32. Save the file on the main directory of the flash drive (Do not put it in another file or folder). It you are unable to format the USB, make sure this .bfo file is the only file not in a folder in the main directory.
- With the DLM powered on, install thumb drive in to USB port on the unit. Once it is done loading, the cube will say “L.C.”. If the cube reads anything other than “L.C.”, remove thumb drive and reinsert it.
- Once cube reads “L.C.”, remove thumb drive and the unit will reboot and then go to “OK”.
- If the cube never reads “L.C.”, try a different USB stick and if that doesn’t work, we may potentially need to try a personal/different email address.
ADDITIONAL DOCUMENTS & HELP
Download the ZIP file, extract the content (.bfo file) and follow the instructions written above.