Ver. 2 Rel. 08.03.10
NEL BUTTON EXTENDER
This is a NEL button extender designed to extend the standard Otis NEL button. For use with 1/4 inch or more wall depths.
Typical Applications:
> Install trim ring on to button.
> Connect harness / interface board to button header.
> Thread PVC extension onto button.
> Install assembly thru wall / panel.
> Install spacer (if needed) over extension.
> Use NEL button nut on extention and tighten to complete assembly.
Note:
PVC extension can be shortened if needed.
VIEW: CATALOG PAGE
