OTIS DISPLAYS

Ver. 2 Rel. 08.03.10

BUTTON EXTENDER

This is a button extender designed to extend the standard Otis button. For use with 1/4 inch or more wall depths.

Button Extension Installation Procedure:

> Determine if a spacer is needed or what length is required and shorten as needed.
> Trim locating tab from button housing and install trim ring.
> Thread button into extension and "clock" the wire terminals into extension windows to allow wire installation.
> Insert supplied wires into the terminals thru the extension windows, tighten terminals by accessing thru botton of extension.
> Black wire to common terminal, Red wire to NC terminal and White wire to NO terminal.
> Pass wires into extension thru the window and out the bottom of the extension.
> Install button with extension into wall from front.
> Install PVC spacer onto extension, behind wall, and install button nut onto extension and tighten the assembly securely.
> Make connections to pigtail.

Note:

> PVC extension can be shortened if needed.
> Extensions may be stacked for increased depth of application.
> Follow local codes. Test. Installation complete.

VIEW: CATALOG PAGE