Ver. 2 Rel. 12.02.22
FIRE KEYSWITCH OPTION
The MBS200 is designed to accommodate 1-2 cars, in a single bank. A 9 inch Industrial TFT screen provides a sleek and modern single point visual status of all cars. The screen can show on screen message jewels such as: Fire Phase 1 & 2, Emergency Power, Car to Lobby, Out of Service indications, amongst other. There is an option to add a Fireman's Jack. Keyswitch interface is through the MBS system, as opposed to being hard wired into a machine room. Typical industry standard lobby panels require multi-conductor wire pulls for each car, while the MBS Lobby Panel Series only requires a single 3-TWSP (actually requires 2-TWSP & 1 common) cable for the entire group.
Typical Applications:
> FCC/CACF elevator control lobby panel
> Elevator status panel
> Remote security monitoring
Features:
> Lower total system install cost
> Single 3-TWSP from MR to lobby panel
> Pre-wired key switches
> 4 Standard Number of Car Messages, Maximum of 8 depending on screen size, 4 for group messages
> Building Network Option Availability
> Reduced lead time - Standard Stock Panel
> 0-70°C operating temperature
Dimensions:
> Metal Face: 14.5"W x 18"H | 13.5"W x 17.0"H x 6.00"D
