Ver. 1 Rel. 06.17.02
DOT MATRIX LED DIGITAL INDICATOR
For floor position display. Any alphanumeric or custom character can be displayed.
> Direct replacement for Westinghouse Syncrodial units
> Low cost design
> Latched input
> Scrolling & roll over
> Hall lantern option
> Passing shime output
> Self Testing
> Message inputs
> Error detection and correction feature
> MR103-X | 1.1"W x 4.0"H x 3.688"D | .3" Characters
> MR107-X | 1.1"W x 4.0"H x 3.688"D | .7 Characters
1. This is not a stand alone unit. Must be used in conjunction with a MCCU controller.
2. Only three hoist wires required from "CCU" to "RDI".
3. Pluggable terminal block with 8' cable supplied.