$ DeviceNet Electronic Data Sheet - Huron Net Works, Inc. $ DN-400 EDS File P/N: 2040019 $ Rev 1.3 8/2/02 Atmel Microprocessor and Numerous Corrections $ Rev 1.2 Uncertain $ Rev 1.1 Original [File] DescText = "DN-400"; CreateDate = 2-15-2001; CreateTime = 14:35:00; ModDate = 8-02-2002; ModTime = 14:55:00; Revision = 1.3; [Device] VendCode = 20; $ Vendor Code - Huron Net Works, Inc. ProdType = 0; $ Product Type - Generic ProdCode = 0x0014 ; $ Product Code MajRev = 2; $ Major Rev MinRev = 1; $ Minor Rev VendName = "Huron Net Works"; ProdTypeStr = "Generic"; ProdName = "DN-400"; Catalog = "DN-400"; [IO_Info] Default = 0X0001; PollInfo = 0X000D, 1, 1; COSInfo = 0x000D, 1, 0; CyclicInfo = 0x000D, 1, 0; Input1 = 1, $ Assembly Size in Bytes 0, $ All bits are significant 0x000D, $ Compatible I/O Type Mask "Hardware Inputs", 6, "20 04 24 65 30 03", ""; Output1 = 1, $ Assembly Size in Bytes 4, $ Four(4) Consecutive Significant Bits 0x0001, $ Compatible I/O Type Mask "Hardware Outputs", 6, "20 04 24 79 30 03", ""; [ParamClass] MaxInst = 4; Descriptor = 9; CfgAssembly = 0; [Params] $ I/O Configuration Param1 = 0, $ first field shall be 0 0, "", $ path size, path 0x0002, $ descriptor 0xC6, $ data type - USINT 1, $ data size - 1 Byte "I/O Configuration", $ name "", $ units "This parameter chooses among the available\n" $ help string "I/O Configurations implemented on the device", 0,1,0 ; $ min, max, default $ Serial Consumed Size Param2 = 0, $ first field shall be 0 0, "", $ path size, path 0, $ descriptor 0xC6, $ data type - USINT 1, $ data size - 1 Byte "Serial Consumed Size", $ name "Bytes", $ units "This parameter selects the Consumed I/O\n" $ help string "Message Size for the Serial Port. This will\n" "also be the Poll Response Size on DeviceNet.", 0,8,4 ; $ min, max, default $ Serial Produced Size Param3 = 0, $ first field shall be 0 0, "", $ path size, path 0, $ descriptor 0xC6, $ data type - USINT 1, $ data size - 1 Byte "Serial Produced Size", $ name "Bytes", $ units "This parameter selects the Produced I/O\n" $ help string "Message Size for the Serial Port. This will\n" "also be the Poll Request Size on DeviceNet.", 0,8,4 ; $ min, max, default $ DeviceNet Address Override Param4 = 0, $ first field shall be 0 0, "", $ path size, path 0x0002, $ descriptor 0xC6, $ data type 1, $ data size "DN Addr Override", $ name "", $ units "This parameter disables(0)/enables(1) setting\n" $help string "MacId and Baudrate over the network and the\n" " serial port", 0, 3, 1; $ min, max, default $ Remaining optional parameters omitted $ Vendor Specific Parameter Param5 = $ parameter instance 0, $ first field shall be 0 6, "20 64 24 01 30 01", $ path size, path 0x0002, $ descriptor (hex) 0xC1, $ data type was 4, the original indicator for BOOL 1, $ data size "polarity", $ name "", $ units "This parameter controls the power sense logic polarity. \n" "0 - Sense is zero when voltage is present \n" "1 - Sense is one when voltage is present ", $ help string 0, 1, 0; $ min, max, default $Remaining optional parameters omitted [EnumPar] Param1= "Serial Link I/O", "Hardware I/O"; Param4= "No Overide", "DNet Overide", "Serial Override", "Both Override"; Param5= "Negative", "Positive"; [Groups] Group1= "Power Sense Input Polarity", 1, 5;